Friday, June 7, 2013

Kindle case

At the end of the previous post, I had a picture of a protective case for a Kindle. This post explains in detail how I made it.



The first step was to cut the bands to correct length. I first sewed across the bands to keep the ends from fraying and then cut them.



Then I pinned them together for sewing. As the bands are a bit stretchy, you need to pin the ends first and then the rest of the length spread evenly.



Next step was sewing the bands together using the yarn used in the edges.



Here are the bands sewn together.



To remove all unevenness, the piece needed to be pressed. I used a regular iron and ironed through a damp cloth.



Here you can see the reverse side. The seams are a lot flatter after ironing.



Then I cut the lining and two pieces of sturdy bubblewrap for reinforcement.



I sewed the lining to a piece of wool fabric. The plastic pieces went between these two fabrics and the seam in the middle kept them in correct places.



Then I cut away all the extra outside the seams.



I sewed pieces of the lining fabric to the short edges of the outer piece.



Then I put the lining and outer piece together, turned the fabric to cover the edges and sewed all the layers together. At his stage the side seams were not yet sewn.



Then it was time to sew the zipper and side seams. The side seams were sewn by hand and only through the edge of the outer pieces, the same way as sewing the bands together. The sides of the lining remained open.

Saturday, June 1, 2013

More card weaving

These are bands I have made after having a lot more practice in card weaving. I found organic cotton yarn at a good price, so I ended up getting quite a lot of it and experimenting with different patterns.


The frame I used for these was just two chair legs joined together.


The chair had four legs, so I got two frames and could work with two bands in parallel.


Here's a closeup in which you can see the cards I'm using. They are made of ordinary playing cards as described in this earlier post.


Most of these bands ended up becoming a handbag. The two side pockets are for a mobile phone and digital camera.


The pockets close with really big snaps.


Inside has a cotton lining and the bag closes with similar snaps as the pockets. There is a small side pocket inside the bag for wallet.


There were some leftover bands and they later became a protective pouch for my Kindle. I will write a separate post later about how I made that.


Tuesday, May 28, 2013

Card weaving

It's been a while since the last post. I'm currently doing the "big cleanup" at my Flickr account and as I'm removing a lot of photos from there, I'll be posting some here. Sometimes a long time passes between different stages of a project, so it's actually easier to get coherent posts this way as I can group photos from past few years according to the subject.

The first of these posts is about card weaving. These are some of the first bands I've ever made. I used inexpensive wool/polyester blends for my first practice bands, because I had no definite plans on what to do with them, I was just practicing the techniques.


Here's another practice piece.


These bands were left unused for a long time, but then I decided to make a small bag for my BJD doll. The lining is wool fabric and there's some padding between it and the outer part.



Tuesday, December 4, 2012

1/6 scale wingback chair

Usually I make doll chairs using a pre-existing structure, such as a plastic bottle, cut to shape and then covered with felt and fabric. This time, however, I wanted to try a proper chair.

I started by designing the required parts. That's actually quite easy as only the sides need actual designing, the rest are just rectangulars, and the biggest challenge is in getting the length and width right. 

I cut the parts from cardboard (fairly thick, I think it came as a backing for mailed comics) and covered the insides with two layers of felt (glued in a few places to keep it in place). Note that I left some edges clear, those are the areas used for gluing the parts together.


Then I covered the pieces with wool fabric. I usually use thinner fabrics, but this suited the style of the chair best.


Here the parts are glued together to make the basic form. You can also see how the edges of fabric were cut into flaps and glued to the other side of the cardboard.


Next, I made the back piece, which is one continuous piece covering the sides and back of the chair. The cardboard pieces are actually a bit longer than the ones for the inside part for a reason I will explain later. I glued the cardboard pieces to the felt, leaving small gaps where they need to form 90 degree angles.


Next,I covered the outside of the back piece with a piece of the same wool fabric. I also glued some of that fabric to the bare parts of the already constructed "inner chair". That was to make a more even surface for gluing the back in place.


Then the back just needed to be glued in place. Here you can see why the outer pieces were longer. Once you make a rectangular piece to close the gap that will be left under the front edge of the seat, the seat will look thicker and the chair will look more authentic.


Here is a picture of the finished chair, with a doll to show the size. The legs of the chair are just round pegs cut to length, glued in place and painted brown.

Sunday, September 2, 2012

Bee

The first Create a Monster set I bought only had one torso, so I decided to make one myself. I had already ordered a couple of the expansion sets, so I decided to make the torso for the bee and paint the upper arms and legs with the correct color. The grey head is here just for reference.

The armature is made of wood and the black and yellow torso is needle felted.




This photo shows the doll before painting and also in comparison to a normal Monster High doll.


I made the stand, in which the upper legs are attached, for painting doll shoes, but as the wooden posts are made of the same round strip as the part of the torso where the legs attach, the stand was perfect also for painting the upper legs.



I used FolkArt's acrylic paint "509 Sunny Yellow" and it was a bit too yellow compared to the lower leg. I painted several coats with it and then mixed the color for the final coat by mixing Sunny Yellow and "480 Titanium White." Finally, I applied a coat of matte sealer to prevent the paint from chipping.


This was just going to be a needle felted wig cap, but I liked how it looks, so I left it as it is and will make another wig using the original plan.


Here is Bee almost finished. I'm still thinking of giving her a stinger, but I'll need to figure out how to make one. I tried using wood, but the result wasn't satisfactory, so I'll continue experimenting.


Friday, August 24, 2012

Needle felted wig for a Monster High doll

I decided to try needle felting to make a wig for a Monster High Create A Monster doll. I started by making a wig cap that would be the basis for an updo. The photos below show it from different sides.




The wig cap kept slipping off or into wrong position, so a peg for keeping it in place was necessary. I used a strip from a 0.3 mm thick metal sheet.


As glue wouldn't have kept the metal strip in place, I cut a small piece of felt, made a hole in it and pushed the peg through.


Then I put the peg in place, spread glue to the felt, put the wig cap in place and pressed it down to the head to make the peg construction stick inside it.


Here is the inside of the finished wig cap.


Then I attached the actual hair inside the edges of the wig cap. I used coarser wool for the wig cap and mohair for the actual hair.


This looked funny and I can imagine all sorts of funny hairdos you could make this way.


However, this one was about to become a very formal updo. I collected the hair and attached it to the top of the head. Then I made the bun and attached its bottom to the top of the head as well. The hairline of this wig is maybe a bit too high, but it's good enough for a first try (and my second needle felting project ever).




Crocheting

I really prefer the way knitted items look, but crocheting is so much easier. Here is a crocheted dress I made for a Rini doll.



The hem is made using the stitches seen in the video below.



The upper part is made using the stitches shown in the next video.