New hot glue gun

I happened to see this in Lidl a couple of days ago as I was buying groceries. I was so sick and tired of fighting with the cord of my old hot glue gun that I got this. It was 14.99 €, which isn't too bad.

Here is the glue gun out of the package and after a bit of use. What I can already say is that I should have got one of these earlier. I thought hot glue was messy and difficult to use, but it wasn't about the glue, I just had a crappy glue gun. This is just great.

For comparison, below is the old one. I assumed it was good, because of the manufacturer. I mean, I've got a hole puncher manufactured by Kinzo and it's great. However, this one has one basic flaw: it doesn't get hot enough. That's the main reason behind all my problems with hot glue. The cordless one gets to 170°C, and the difference is noticeable. I don't have any papers that may have come with the old one, but I'm sure the temperature is lower, because the glue just stays too thick. I always thought it was supposed to be that way, because this was the first hot glue gun I've ever had. Now I know better.

New headband for the Kindi Kids doll

As I seem to be making an entire outfit for the doll, I thought I might as well make a new headband for her too. I used the original to draw a paper pattern and then cut the piece out of a metal sheet (0.3 mm thick).

Cutting the metal was easy with these shears. I've been wondering about the manufacturer as there are no markings in these. Did a Google search and found a picture of similar shears, but no info on who makes these. However, the picture was from ebay, so I found out that these sell for about 10 €. I don't remember what I paid as it was over 15 years ago.

I bent the metal piece using the original headband as a guide.

Then I covered the upper surface of the metal piece with felt using hot glue.

The next stage was cutting a piece of felt that would cover the inside and gluing it in place.

I glued some ribbon on the upper surface using again hot glue.

The final stage was gluing one of these paper flowers to the headband.

The text in the package sounds really good, but I'm a bit skeptical. I tried finding verification for this, but all searches only found online stores selling this stuff. You'd think that they would make a big deal out of the story, if it's legit, so I still have my doubts.

Here is a picture of the finished headband on the doll. Metal should keep its shape fairly well, and gluing the felt onto it when it has been bent should also add some tension that'll help to keep the shape.

Necklace for a doll

In the previous post about the coat for Kindi Kids dolls, the doll had a pearl necklace with a star pendant. That was my first experiment with new material, a strand of plastic pearls. There's 2 meters of it in the roll, so that's enough for quite a few necklaces.

The star is one from this package. These decorations are just the right size for larger dolls.

I used metal wire to make a ring for attaching the star to the string of pearls (sewing thread would work just as well).

The closing mechanism gave me some trouble. I thought of all sorts of elaborate alternatives, but ended up gluing a loop of thin rubber band to the other end of the strand with hot glue. This loop goes around the first pearl in the other end to keep the necklace closed.

Here is the doll again, wearing the necklace. The pearls would be too big for most dolls of this size, but the proportions of this doll are so strange that the pearls look just fine.

Another try with the coat

After figuring out what went wrong the first time, I modified the pattern. The main change was removing the shoulder seams and having side seams instead. This way, the sleeves are much easier to sew in place. The back piece is also a bit wider than it was originally. However, the front is the same width, I didn't make any changes to it.

Here is the main part of the coat with edges treated with textile hardener. This fabric frays very easily, so the hardener was useful as I didn't want wide seam allowances.

The best thing about this pattern is that you can use the sewing machine to sew the sleeves in place. It is also much easier to get everything aligned correctly this way.

The last part is to sew the side seams. The next picture shows the coat without any trimmings, but I plan to use some sort of ribbon for the edges. That means hand sewing the ribbon to cuffs. If you sew it before sewing the side seams, even that can be done with the sewing machine. I just couldn't decide what I wanted, so I finished the coat and will think about the ribbons later.

Edit: You can find the PDF file containing the pattern for this coat on my web site.

Coat for the Kindi Kids doll

I decided to try making a coat using the dress pattern as a starting point. I shortened it, moved the opening to the front, rounded the edges of the front pieces, and made a pattern for the sleeves. In this picture, the sleeves are too long. The doll's arms are really short and the hand size means the sleeves need to be quite wide. These sleeves were a bit too narrow, although the resulting coat can be put on the doll, but only just.

I treated the edges of the fabric with fabric hardener (basically glue), because this fabric frays easily. After that was dry, I sewed some ribbon to the cuffs to make them look neat without turning the fabric.

Then I sewed the sleeve, side and shoulder seams. Before that, I made sure the hands would go through the arm holes and sleeves. It was a tight fit, but manageable, although I knew the pattern would require modifications after checking all the things that were wrong with it.

The final step was sewing the sleeves in place and adding ribbon to the remaining edges. I managed to get the coat on the doll, but while I was doing that, I also realized the back piece needs to be wider. This doll's arms aren't quite as bad as the Living Dead Doll's, but the hands are still quite far apart, making it difficult to put something like this on. See the Fashion Doll Shoes blog for the description of making the shoes.

This counts as upholstery

I was looking at the chair I have by my sewing machine and realized it's one of the upholstery projects. Even smaller than the stool, but still upholstery. It's an office chair with the back rest removed. The reason I'm not using it by my desk is that the lifting mechanism is broken and it's permanently in its lowest position.

The seat fabric was black and not too worn, but I wanted something more colorful. The first thing to do was to remove the seat by opening some screws.

Then the plastic cover underneath the chair needed to be removed. Its only purpose is to cover the wooden board inside the seat and the stapled edges of the fabric.

In this case, there was no need to sew anything into shape, just get a rectangular piece and turn its edges under the seat and staple them there. The only reason I had to sew anything was that I didn't have enough of one fabric to do this, so I had to combine two with zigzag stitches.

Here is the result. It's been a few years since I did this, and the chair still looks nice. The stitches are holding well, and I don't expect this to need a new cover any time soon. The one thing that bugs me about this is that the center fabric is not exactly in the center. The left edge is wider than the right. It really makes no difference, but I can't help noticing it. You always notice the little details that didn't go exactly the way you planned.

Recycling the leather

I've been thinking about the leather I got when I removed the stool cover during the smaller upholstery project. There's quite a bit of it, and I want to find a practical way of using it. One of the ideas I had was to make a bag, but I already have one made of leather. My aunt made it and gave it to my mother and I got it when the house was being emptied for sale. It's probably made from furniture industry's leftover pieces and I'm its third owner so far, so it's a well recycled item already.

On the right in the picture are the pieces from the stool. The rectangular pieces (a few dozen) are from the sides and the rest from the top. The top pieces are thinner and more worn than the side pieces, so they're also softer. I like the worn look of the top pieces, but the area they cover isn't large, so they can't be used for anything big. Another restriction is that I haven't sewn leather with a sewing machine before, so I don't want the first project to be anything too complicated. I guess I'll just leave those pieces alone for now and try to figure out something useful.

I think these were originally pieces left over from making bigger furniture, because there was no need to have so many small side panels in the stool otherwise, considering the amount of work the sewing must have required. Then they served their purpose for over 20 years before ending up this way, waiting for their next purpose.