Sunday, September 2, 2012

Bee

The first Create a Monster set I bought only had one torso, so I decided to make one myself. I had already ordered a couple of the expansion sets, so I decided to make the torso for the bee and paint the upper arms and legs with the correct color. The grey head is here just for reference.

The armature is made of wood and the black and yellow torso is needle felted.




This photo shows the doll before painting and also in comparison to a normal Monster High doll.


I made the stand, in which the upper legs are attached, for painting doll shoes, but as the wooden posts are made of the same round strip as the part of the torso where the legs attach, the stand was perfect also for painting the upper legs.



I used FolkArt's acrylic paint "509 Sunny Yellow" and it was a bit too yellow compared to the lower leg. I painted several coats with it and then mixed the color for the final coat by mixing Sunny Yellow and "480 Titanium White." Finally, I applied a coat of matte sealer to prevent the paint from chipping.


This was just going to be a needle felted wig cap, but I liked how it looks, so I left it as it is and will make another wig using the original plan.


Here is Bee almost finished. I'm still thinking of giving her a stinger, but I'll need to figure out how to make one. I tried using wood, but the result wasn't satisfactory, so I'll continue experimenting.


1 comment:

Cordie Kelley said...

How about the pointed end of a dental floss pick that you can buy in bags of 50 at the dollar store for the stinger?
Bee is really great!