Monday, January 11, 2021

Industrial sewing machines

Second week started today. I'm really starting to get the hang of using an industrial sewing machine. The teacher said that once we get used to them, we won't want to use anything else. I think she might be right. 

For comparison, here is first my own sewing machine, Pfaff Passport 3.0, which is quite nice, at least for the stuff I've done so far.


The thing about it is that it has a quite plastic feeling. I mean, the sewing machine I used when I learned sewing for the first time as a kid was a 1970's Singer. All metal and very sturdy. It was one my mother got from her sister who worked in a garment factory for a long time, so she's always had nice machines at home as well.

And then there is this, the machine I'm using at school. It's also a Pfaff, but totally different from the consumer model. During one conversation, the teacher said that in all of her decades of teaching this stuff, she has never seen anyone manage to break one of these.


I've also had a chance to use an overlocker, which I've never used before. Those things are so handy compared to using zigzag for the edges of fabric. At least I had seen an overlocker before, but the third one I've used was totally new for me. It's one you use for sewing bias binding, and I used it for sewing the edges in my second project, the kettle-holder shown in the picture below. The back side is just one big piece of the blue fabric with hearts.


I made this one on Friday, and then made another one today, but didn't remember to take a picture of that. I had a lot of trouble with the bias binding on that one, so I got plenty of practice in removing stitches. I did manage to finish it eventually and start the next project, which is waiting there on my table for tomorrow morning when I will continue sewing zippers.

Saturday, January 9, 2021

First two days done

The school started on Thursday, and it's Saturday now, so the first week is done. Feeling a bit overwhelmed, but also more positive about being able to do this. Six hours a day feels okay for now, but we'll see after a few weeks how tired I'm going to get (or not, hopefully).

One consequence of the studies is that the blog posts will probably happen on weekends. Depends on how I'm feeling, but I'm not going to take any pressure about this stuff, because the studies take priority.

The first two days were spent on getting to know how to use the industrial sewing machines we have in the classroom. They're more complicated than consumer models, but not hard to use once you get the setup done right.

The first project we had was for practicing sewing straight lines on even distance from each other. The picture below shows what I managed to do. The lines are (should be) 0.5 cm distance from each other. There are two different fabrics sewn together, and I used light grey (vertical) and green (horizontal) threads.


Sewing the zipper was nothing new, but this was the first time I put that slider on a zipper, because there was just a big roll of zipper from which you cut the needed length and then inserted the slider. I've always wondered how you do that, but it's actually quite simple once you manage to do it right once.

The pouch went into use immediately as I'm going to use it for my sewing tools. The school has much of the stuff you need, but as usual, tools in common use are not that well maintained. Having your own is a good idea. This is big enough for my big scissors, so I'll be using this from now on.

Saturday, January 2, 2021

Collage of old comics

This is one of the projects I did at the same time with all the repainting. I had this old horror comic book that was falling to pieces. A good example of why acid free paper is used for anything that's supposed to last. I used parts of it for various projects, but decided to make a collage of one of my favorite stories.


I used a canvas meant for painting and cut out the best panels and also keeping some that made the presentation logical. Then I planned the placement on the canvas.


I painted the canvas black (using what was left of the metal paint), used glue varnish to glue the panels in place, and then applied glue varnish on top to protect the paper.


Here is the result. It's been a few years and the collage is still fine. It seems that the glue varnish stopped the paper from yellowing more.




Friday, December 25, 2020

New hot glue gun

I happened to see this in Lidl a couple of days ago as I was buying groceries. I was so sick and tired of fighting with the cord of my old hot glue gun that I got this. It was 14.99 €, which isn't too bad.


Here is the glue gun out of the package and after a bit of use. What I can already say is that I should have got one of these earlier. I thought hot glue was messy and difficult to use, but it wasn't about the glue, I just had a crappy glue gun. This is just great.


For comparison, below is the old one. I assumed it was good, because of the manufacturer. I mean, I've got a hole puncher manufactured by Kinzo and it's great. However, this one has one basic flaw: it doesn't get hot enough. That's the main reason behind all my problems with hot glue. The cordless one gets to 170°C, and the difference is noticeable. I don't have any papers that may have come with the old one, but I'm sure the temperature is lower, because the glue just stays too thick. I always thought it was supposed to be that way, because this was the first hot glue gun I've ever had. Now I know better.



Thursday, December 24, 2020

New headband for the Kindi Kids doll

As I seem to be making an entire outfit for the doll, I thought I might as well make a new headband for her too. I used the original to draw a paper pattern and then cut the piece out of a metal sheet (0.3 mm thick).


Cutting the metal was easy with these shears. I've been wondering about the manufacturer as there are no markings in these. Did a Google search and found a picture of similar shears, but no info on who makes these. However, the picture was from ebay, so I found out that these sell for about 10 €. I don't remember what I paid as it was over 15 years ago.


I bent the metal piece using the original headband as a guide.


Then I covered the upper surface of the metal piece with felt using hot glue.


The next stage was cutting a piece of felt that would cover the inside and gluing it in place.


I glued some ribbon on the upper surface using again hot glue.


The final stage was gluing one of these paper flowers to the headband.


The text in the package sounds really good, but I'm a bit skeptical. I tried finding verification for this, but all searches only found online stores selling this stuff. You'd think that they would make a big deal out of the story, if it's legit, so I still have my doubts.


Here is a picture of the finished headband on the doll. Metal should keep its shape fairly well, and gluing the felt onto it when it has been bent should also add some tension that'll help to keep the shape.



Wednesday, December 23, 2020

Necklace for a doll

In the previous post about the coat for Kindi Kids dolls, the doll had a pearl necklace with a star pendant. That was my first experiment with new material, a strand of plastic pearls. There's 2 meters of it in the roll, so that's enough for quite a few necklaces.


The star is one from this package. These decorations are just the right size for larger dolls.


I used metal wire to make a ring for attaching the star to the string of pearls (sewing thread would work just as well).


The closing mechanism gave me some trouble. I thought of all sorts of elaborate alternatives, but ended up gluing a loop of thin rubber band to the other end of the strand with hot glue. This loop goes around the first pearl in the other end to keep the necklace closed.


Here is the doll again, wearing the necklace. The pearls would be too big for most dolls of this size, but the proportions of this doll are so strange that the pearls look just fine.



Tuesday, December 22, 2020

Another try with the coat

After figuring out what went wrong the first time, I modified the pattern. The main change was removing the shoulder seams and having side seams instead. This way, the sleeves are much easier to sew in place. The back piece is also a bit wider than it was originally. However, the front is the same width, I didn't make any changes to it.

Here is the main part of the coat with edges treated with textile hardener. This fabric frays very easily, so the hardener was useful as I didn't want wide seam allowances.


The best thing about this pattern is that you can use the sewing machine to sew the sleeves in place. It is also much easier to get everything aligned correctly this way.


The last part is to sew the side seams. The next picture shows the coat without any trimmings, but I plan to use some sort of ribbon for the edges. That means hand sewing the ribbon to cuffs. If you sew it before sewing the side seams, even that can be done with the sewing machine. I just couldn't decide what I wanted, so I finished the coat and will think about the ribbons later.


Edit: You can find the PDF file containing the pattern for this coat on my web site.